Login TP-Link Wifi Router, How to connect tp link with computer, Login Default Tplink Router, Configure Windows user IP
Hi Blues Pedia. This tutorial we’re gonna learn how to connecting TP LINK with computer which will be used to remoting/Setting so that TP link can configurated as we wanted, so we can login to TP-Link Wifi Router. Start from basic setting such as chaging username and password, so that they can be the repeater, WDS setting, router, And Other settings.
Before we’re gonna discuse this, the first step we should understand the setting that basically needed such like how to connect TP link with Computer, For this kind of TP link that i am used is Type TL-MR3420. Even tho i am using Type MR340. this tutorial can be used for another type of TP link. because it has the same way to connecting TP link wth computers, so let us get started
A. Checking the default setting TP link
As we can found in all product of Tp link, almost has been featured with information of default setting from TP link that will we are gonna use. usually this kind of information can be found bottom side of TP link, if you cant find it you can check it in manual book, just like this:
Image above shown the image of TP link’s Bottom Side from typpe TP-Link MR3420 3D/4D Wireless N Router that i am used now. as yo can see in the bottom side there are informations that we can know, they are:
➥ Type : 3D/4D Wireless N Router
➥ Model : TP Link MR3420
➥ Wireless pasword(default)=50608232
➥ Username(default) : admin
➥ Password(default) : admin
➥ Mac address
➥ serial nimber
➥ because TP link that i use is DHCP so the default IP setting is not written, even tho it is not written usually the default setting IP is 192.168.0.1 (All types TP link)
B. Connecting TP link with computer
a. Via wireless
first step that we do to connect TPlink with computer is turning off TP link first, after TP link is on and wifi is actived so the computer that we use will detect the wifi signal from on tp link, example Tp-link_79AB (SSIID Dafault)
b. via lan/ UTP cable
but if you have waiting so long time but none SSID tp link get detected, you must connect TP link to computer with UTP cable, the simpliest way is :
1. Get the UTP cable
you can get this stuff from computer shop this price in not that expensive just arround 2$ you can get this stuuf.
2. Let’s get connecting
plug the point of UTP cable with port etheret in Laptop/computer, and plug the tip the other side of UTP with port ethernet tp link. REMEMBER to plug to port 2 until 5 not in port 1, bercause port 1 is used for internet setting.
C. Configuration IP Computer
the first thing to make TPlink can be remoted from computer is IP Computer and IP TP link must be is one segmen, so it is very important to make sure the IP Network is same. this is the way:
1. Open Control PAnel
click logo windows and then type “control panel” and click control panel navigation result of searching.
2. Open Network & Sharing center
Still in the same page control panel, type up “network” in searchig colom and then click navigation and click network and sharing center
3. open page change adpater
inside network & sharing center you’ll find : “change adpater” and then click it.
4. Show the setting of IP user
Right click icon of LAN network, and choose properties, Tab networking, internet protool version 4 (TCP/ipv4)
5. Configuration client IP
manually the default Tplink which is used for DHCP server, TP link will give random IP automaically to connected computers both connecte vua LAN and WIfi, so your IP setting in your compute is :
inside internet protocol version 4(TCP/IPv4) choose option “Obtain an ip adress automatically” and obtin DNS server address automatically if you done please click OK.
after that, wait until several second, and then right click icon od LAN network dan choose status if your computer got he ip from tplink, (ex. just lie this picture below) so your computer has been connected with tplink.
but if the TP link is not using DHCP server, we should setting Computer IP manually, like this :
inside page internet protovol version 4(TCP/IPv4) choos option “use the following IP adress” and then fill the colom ip adress with computer ip adress, for example if IP TP link is 192.168.0.1 so just fill the computer ip with 192.168.0.2 or 192.168.0.6, 192.168.0.50(the point is change the last ip number with make sure it different witg TP link IP).
for the second colom, fill the colom subnet mask with 255.255.255.0
while for the tird colom fill with IP TP link, such as: 192.168.0.1 if done and click OK.
D. Login TP-link
As you can see at the picture above, the IP Default gateway fro tpink that i am using is 126.96.36.199 the next step is open web browser for example mozilla firefox/google chrome and type adrees of IP gateway Tp-LInk, if the adress is corrected written so will show the login page just lake this image :
if has showed up the login page just like the image above, so tp link that we use has already connected well with computer, to enter the menu setting, type on and write ussername default T-link dan its password. click login and will show the setting menu TP link just like this image below :
Finally this tutorial is ended, now you can connect TP-link with computer. Thanks for your close attention and read this tutorial. dont forget to read another tutorials and dont forget to share and i humbly open for comment.